If the nozzle of the perfume bottle is broken, you can buy a spray nozzle of the same type on the Internet. Note that the perfume nozzle is generally sealed with aluminum. Take care not to damage the bottle body when removing the nozzle; you can also use a sterile needle tube after the nozzle is removed. The perfume was sucked out and replaced with another perfume bottle.
How to repair perfume bottle nozzle
The simplest and most direct method is to unplug the spray head, suck out the perfume with a needle, bottling it or directly replace it with other complete glass bottle packaging. Perfume is a volatile product. If the nozzle is broken, it may also cause the perfume to evaporate faster. The best way is to change the packaging. Common perfume bottles use spray heads. If the spray head is pregnant, it is difficult to unscrew the cap of the original perfume bottle. You can only choose to replace the bottle. In the process of filling, be sure to use a clean and hygienic sterile syringe to avoid contamination of perfume. You can continue to use it after repacking, and it is very convenient for daily carrying!
How to remove the perfume bottle nozzle
If the spray head on the perfume bottle is dead, we can remove it in two ways. The first is to clamp the neck guard of the spray head with pliers, and then twist the perfume bottle by hand. Remember not to use force to twist the pliers. , Otherwise the bottle is easy to explode. When twisting, keep the pliers and the bottle vertical, and then remove the nozzle after loosening; the second method is to violently dismantle the bottle mouth, but this method is not recommended.
What to do if the perfume bottle nozzle leaks
If the nozzle of the perfume bottle leaks, it needs to be replaced in time. If the nozzle leaks, you must not continue to use it, otherwise a lot of perfume may be wasted, and the effect of spraying is not good. When using perfume, you should press gently when spraying. Do not press the nozzle repeatedly. In fact, it is enough to spray each position once. Frequent pressing of the nozzle can easily damage it.